2x25 is the biggest banner we print and is perfect for those large
outdoor banners business retailers use. It is the same size as a 2x25 plywood or drywall sheet for a good solid backdrop and measures a full 48x96 inches.
Do you have the need for a long (25 foot) banner to display your message in a GIANT way? Whether you have a message that you would like to display on one single line or a message with a logo or image (or simply your logo printed repeatedly multiple times) that you would like printed over the length of our 2' x 25' banner, or maybe you simply have a narrow height to work with to display your banner in a valuable advertising space but a length that will accommodate a 25' long banner that is certain to be noticed! This is the banner solution for you. This printed vinyl banner is manufactured at 24” tall (2 feet in height) by an amazingly long 300” (25 feet in length!), you can safely print your message in 14” tall text, assuming that all of your lettering is printed in capital letters; leaving 5” of white space (or the color, design, or print of your choice) on the top and bottom of the banner, in a single line making your message easy to read from a great distance; UP TO as far away as 585 feet away, depending on your choice of design, font(s) and color contrast! Common uses for a banner of this dimension could include parking control, annual city events, showing support for multiple sponsors along a section of a fun run, wrapping a section of a parks pavilion for a family celebration that is certain to be remembered, Birthday or Retirement Party banners, the only limit is your imagination! If you have a long, single line message that you want to be seen from afar, this is the banner for you!
(* please note, that if your banner design uses both upper and lower case letters, you should increase the amount of 'white space' (the blank or unused area above and below your text message or imagery. This is extremely important to consider when designing your individual banner if it includes both upper and lower case text.)
Most popular
choice for promotional banners, these regular duty vinyl banners printed on 13oz bright white vinyl
in matte or gloss finish and suitable for indoor and outdoor use for up to 2 years with proper care.
18oz Vinyl
Starting
at
$140
A go to choice
for banners to replace or compliment permanent signage, these heavy duty banners printed on thick
matte heavy duty 18oz vinyl are suitable for extended outdoor use for up to 3 years with proper
care.
Mesh Vinyl
Starting
at
$210
These 8oz mesh
banners are perforated with a micro hole pattern to allow the wind, light and sound through. They
are a perfect solution for locations with high winds or with a requirement for partial transparency.
18oz Pole Pocket Vinyl
Starting
at
$200
Printed on smooth
lay flat 18oz vinyl, these banners come with clean cut edges and 4-inch pockets installed on
top/bottom, left/right or top only, making perfect signage wherever pole installation is required.
Pockets accept 2-inch round poles (poles not included).
18oz Double Sided Vinyl
Starting
at
$250
These banners are
printed on non transparent 18oz vinyl on both sides with either same or different image with clean
cut edges. The highly opaque blockout layer insures no see through or image ghosting from side to
side. Options include pole pockets.
2x25 Banner File Setup
Pixel Dimensions
at 72dpi - 3456x6912 pixels
at 100dpi - 4800x9600 pixels
at 150dpi - 7200x14400 pixels
at 300dpi - 14400x28800 pixels
As a general rule, the
more detailed your artwork is, the higher DPI (pixel count) it should
to be. For pictures and photographs, lower pixel/dpi counts are fine (72-100dpi). For text rich artwork,
and for files with lots of details such as logos, maps, menus, etc,
use higher pixel/dpi count (150-300dpi).
72 dpi is the minimum resolution we would recommend for printing, and
the
300 dpi for the maximum resolution.
Adobe Illustrator
(Also applies to all Vector files)
Set up canvas to be 24” x 300” in inches (or 1/2
scale if necessary)
Regular RGB, sRGB color space, or Regular CMYK
Embedded raster images should be at least 100dpi at actual size
Embed all raster images
Convert all text to outlines
Expand all strokes
Save as a pdf file
Adobe Photoshop
(Also applies to all Raster Files)
Set up artboard to be 24” x 300” in inches (or 1/2
scale if necessary)
Free shipping on orders $100 or more
