4x2 is the biggest banner we print and is perfect for those large
outdoor banners business retailers use. It is the same size as a 4x2 plywood or drywall sheet for a good solid backdrop and measures a full 48x96 inches.
Just like the other banner sizes that we offer, this size offers all the same great features of all of the other banners that we produce, the only difference being that the 4' x 2' banner is manufactured to be displayed hanging 4 feet (48”) vertically (up and down) and 2 feet (24” wide / left to right) horizontally. Perfect for displaying in many windows or other spaces that are taller than they are wide, hang them from ceiling rafters, commercial drop grid ceilings, or that unique advertising space we all seem to have and just don't know how to best use it visually. Our oblong banners are the perfect solution for all of these scenarios and more. As with all of our vinyl banners they can be printed in any color, in full photographic quality to show off your individual and unique design. Printed on standard 13 ounce indoor or outdoor durable vinyl, all 4 edges can be optionally heat welded to create solid hems that will increase the longevity of your banners, grommets are then installed in all 4 corners, as well as on both the top and the bottoms. Display your banners using the proper techniques and appropriate hardware for the locations they will be installed and store them properly when not in use and our top quality banners will give you great value for your advertising budget, these banners are a value to say the least. If you do not have your own ready to print artwork ready to upload, you are welcome to use our complimentary design software and continuously growing library of free design templates to ensure that your banners meet your purpose in business, advertising, or any celebratory event you are promoting.
Most popular
choice for promotional banners, these regular duty vinyl banners printed on 13oz bright white vinyl
in matte or gloss finish and suitable for indoor and outdoor use for up to 2 years with proper care.
18oz Vinyl
Starting
at
$30
A go to choice
for banners to replace or compliment permanent signage, these heavy duty banners printed on thick
matte heavy duty 18oz vinyl are suitable for extended outdoor use for up to 3 years with proper
care.
Mesh Vinyl
Starting
at
$45
These 8oz mesh
banners are perforated with a micro hole pattern to allow the wind, light and sound through. They
are a perfect solution for locations with high winds or with a requirement for partial transparency.
18oz Pole Pocket Vinyl
Starting
at
$31
Printed on smooth
lay flat 18oz vinyl, these banners come with clean cut edges and 4-inch pockets installed on
top/bottom, left/right or top only, making perfect signage wherever pole installation is required.
Pockets accept 2-inch round poles (poles not included).
18oz Double Sided Vinyl
Starting
at
$40
These banners are
printed on non transparent 18oz vinyl on both sides with either same or different image with clean
cut edges. The highly opaque blockout layer insures no see through or image ghosting from side to
side. Options include pole pockets.
4x2 Banner File Setup
Pixel Dimensions
at 72dpi - 3456x6912 pixels
at 100dpi - 4800x9600 pixels
at 150dpi - 7200x14400 pixels
at 300dpi - 14400x28800 pixels
As a general rule, the
more detailed your artwork is, the higher DPI (pixel count) it should
to be. For pictures and photographs, lower pixel/dpi counts are fine (72-100dpi). For text rich artwork,
and for files with lots of details such as logos, maps, menus, etc,
use higher pixel/dpi count (150-300dpi).
72 dpi is the minimum resolution we would recommend for printing, and
the
300 dpi for the maximum resolution.
Adobe Illustrator
(Also applies to all Vector files)
Set up canvas to be 48” x 24” in inches (or 1/2
scale if necessary)
Regular RGB, sRGB color space, or Regular CMYK
Embedded raster images should be at least 100dpi at actual size
Embed all raster images
Convert all text to outlines
Expand all strokes
Save as a pdf file
Adobe Photoshop
(Also applies to all Raster Files)
Set up artboard to be 48” x 24” in inches (or 1/2
scale if necessary)
