4x4 is the biggest banner we print and is perfect for those large
outdoor banners business retailers use. It is the same size as a 4x4 plywood or drywall sheet for a good solid backdrop and measures a full 48x96 inches.
4 foot square banners are actually one of our more eye catching, attention getting configurations. Probably because of the fact that this is one of the larger format displays for print space we offer, and the fact that you are dealing with a 4' x 4' area for your printed message, the possibilities for designing an attention getting banner are endless. 4'x4' banners look even bigger than they are and provide enough space for using large type-set fonts and huge graphics. These 4x4 displays also are perfect to adhere on the back of a half of sheet of plywood. Mounted with stakes or poles, this sized banner is perfect for commercial real estate signs and other larger than average square banner displays for attracting motorists as they drive by your signage. Whether you plan to hang your 4 ft square banners on a wall space, over a window, or you plan on triangular mounting two half sheets of plywood and adhere your banners to the backdrop for those new cross triangle configured signs people are starting to use, we are confident you will be more than pleased with the print quality and finishing standards we at Printastic will apply to your 4x4 banner.
Most popular
choice for promotional banners, these regular duty vinyl banners printed on 13oz bright white vinyl
in matte or gloss finish and suitable for indoor and outdoor use for up to 2 years with proper care.
18oz Vinyl
Starting
at
$50
A go to choice
for banners to replace or compliment permanent signage, these heavy duty banners printed on thick
matte heavy duty 18oz vinyl are suitable for extended outdoor use for up to 3 years with proper
care.
Mesh Vinyl
Starting
at
$75
These 8oz mesh
banners are perforated with a micro hole pattern to allow the wind, light and sound through. They
are a perfect solution for locations with high winds or with a requirement for partial transparency.
18oz Pole Pocket Vinyl
Starting
at
$63
Printed on smooth
lay flat 18oz vinyl, these banners come with clean cut edges and 4-inch pockets installed on
top/bottom, left/right or top only, making perfect signage wherever pole installation is required.
Pockets accept 2-inch round poles (poles not included).
18oz Double Sided Vinyl
Starting
at
$80
These banners are
printed on non transparent 18oz vinyl on both sides with either same or different image with clean
cut edges. The highly opaque blockout layer insures no see through or image ghosting from side to
side. Options include pole pockets.
4x4 Banner File Setup
Pixel Dimensions
at 72dpi - 3456x6912 pixels
at 100dpi - 4800x9600 pixels
at 150dpi - 7200x14400 pixels
at 300dpi - 14400x28800 pixels
As a general rule, the
more detailed your artwork is, the higher DPI (pixel count) it should
to be. For pictures and photographs, lower pixel/dpi counts are fine (72-100dpi). For text rich artwork,
and for files with lots of details such as logos, maps, menus, etc,
use higher pixel/dpi count (150-300dpi).
72 dpi is the minimum resolution we would recommend for printing, and
the
300 dpi for the maximum resolution.
Adobe Illustrator
(Also applies to all Vector files)
Set up canvas to be 48” x 48” in inches (or 1/2
scale if necessary)
Regular RGB, sRGB color space, or Regular CMYK
Embedded raster images should be at least 100dpi at actual size
Embed all raster images
Convert all text to outlines
Expand all strokes
Save as a pdf file
Adobe Photoshop
(Also applies to all Raster Files)
Set up artboard to be 48” x 48” in inches (or 1/2
scale if necessary)
