Our 4ft x 30ft banners come in a variety of vinyls suitable for most indoor and outdoor uses. Choose from 13oz. vinyl for standard vinyl banners, 8oz. mesh for wind resistant and see through banners, or 18oz. vinyl for banners suitable for extended outdoor use or printed on both sides and with pole pockets. Options include heat welded edge hemming and grommets available in a choice of nickel silver, anodized black, or enamel white colors.
Most popular choice for promotional banners, these regular duty vinyl banners printed on 13oz bright white vinyl in matte or gloss finish and suitable for indoor and outdoor use for up to 2 years with proper care.
4x30 18oz Outdoor Heavy Duty Banner
starting at $320
A go to choice for banners to replace or compliment permanent signage, these heavy duty banners printed on thick matte heavy duty 18oz vinyl are suitable for extended outdoor use for up to 3 years with proper care.
4x30 Mesh Banner
starting at $460
These 8oz mesh banners are perforated with a micro hole pattern to allow the wind, light and sound through. They are a perfect solution for locations with high winds or with a requirement for partial transparency.
4x30 Pole Pocket Banner
starting at $480
Printed on smooth lay flat 18oz vinyl, these banners come with clean cut edges and 4-inch pockets installed on top/bottom, left/right or top only, making perfect signage wherever pole installation is required. Pockets accept 2-inch round poles (poles not included).
4x30 Double Sided Banner
starting at $600
These banners are printed on non transparent 18oz vinyl on both sides with either same or different image with clean cut edges. The highly opaque blockout layer insures no see through or image ghosting from side to side. Options include pole pockets.
File Setup for Printing 4’x30’ Banner
Adobe Photoshop (also applies to all Raster Files)
- set up artboard to be 48” x 360” in inches (or 1/2 scale if necessary)
- set dpi to be anywhere from 100 to 300 dpi
- regular RGB or sRGB color space
- save as 100% quality jpeg file
Adobe Illustrator (also applies to all Vector files)
- set up canvas to be 48” x 360” in inches (or 1/2 scale if necessary)
- regular RGB, sRGB color space, or
- Coated GRACol or Coated US SWOP v2 color space
- embedded raster images should be at least 100dpi at actual size
- embed all raster images
- convert all text to outlines
- expand all strokes
- save as a pdf file
Downloadable file templates for 4x30 banner
Pixel Dimensions for 4x30 banners
For 4x30 banner pixel dimensions should be:
- at 72dpi - 3456x25920 pixels;
- at 100dpi - 4800x36000 pixels;
- at 150dpi - 7200x54000 pixels;
- at 300dpi - 14400x108000 pixels;
As a general rule, the more detailed your artwork is, the higher DPI (pixel count) it should to be. For pictures and photographs, lower pixel/dpi counts are fine (72-100dpi). For text rich artwork, and for files with lots of details such as logos, maps, menus, etc, use higher pixel/dpi count (150-300dpi).
72 dpi is the minimum resolution we would recommend for printing, and the 300 dpi for the maximum resolution.
4 x 30 feet
48 x 360 inches
121.92 x 914.4 cm (Metric)
4ft. high by 30ft. long
Full color latex printing
1000 dpi photo quality mode
Print is UV & weather proof
Shipped rolled in a tall box
Banners are never folded